At the end of a Queensland tenancy, the property manager compares the property with the entry condition report you signed when you moved in. Knowing what they look for, and where they look, is the easiest way to avoid a dispute over your bond.

Quick answer

Agents compare the property with your entry condition report, room by room. They check the oven, rangehood, cupboards, bathrooms (grout, shower screen, exhaust fan), window tracks, skirting boards, walls, light fittings, floors and carpets, plus anything listed as a special term in your lease. Fair wear and tear is excluded.

How the final inspection works in Queensland

When you moved in, you received an entry condition report (Form 1a) recording the state of each room. At the end of the tenancy you fill in the exit condition report (Form 14a) and give it to the property manager. The agent then inspects the property and notes anything that is dirtier or more damaged than at the start, allowing for fair wear and tear. You can find both forms on the RTA website.

Kitchen

  • Inside the oven, the oven door glass, racks and trays
  • Cooktop, knobs and the area around the burners
  • Rangehood surfaces and filters (a common fail point)
  • Inside and outside of cupboards and drawers, including crumbs in corners
  • Splashback, benchtops, sink, taps and the dishwasher seal and filter

Bathrooms and laundry

  • Shower screen soap scum and water marks
  • Grout, silicone and mould in corners and around the bath
  • Exhaust fan covers, which collect dust and lint
  • Toilet base, behind the toilet and under the seat hinges
  • Laundry tub, behind and under where the washing machine stood, and the dryer vent area

Bedrooms and living areas

  • Wardrobe shelves, tracks and mirrored doors
  • Skirting boards, door frames and the tops of doors
  • Marks on walls, light switches and power points
  • Window sills, tracks, glass and fly screens
  • Ceiling fans, light fittings and air-conditioner filters
  • Carpets for stains and odour, and hard floors for marks

Outside areas

Balconies, patios, garages and carports are usually checked for cobwebs, leaves, oil stains and rubbish. Lawns and gardens are the tenant’s responsibility under many leases, so check your agreement.

The spots tenants miss most

  1. Rangehood filters
  2. Window and sliding door tracks
  3. Exhaust fans
  4. Tops of skirting boards and door frames
  5. Behind the fridge and washing machine spaces

Our bond cleaning checklist covers every one of these.

Frequently asked questions

Can I be at the final inspection?

Ask your property manager. Being there, or at least taking date-stamped photos before you hand back the keys, makes it easier to resolve any disagreement.

What if the agent says the clean is not good enough?

Ask for the issues in writing. If you used a professional cleaner, send them the list straight away. We re-clean eligible issues free if they are reported within 7 days of your clean.

Does fair wear and tear apply to cleaning?

Fair wear and tear covers deterioration from normal use, such as faded curtains or worn carpet in walkways. It does not cover dirt, grease or stains that cleaning would remove.

Need a bond clean in Brisbane?

Free, no-obligation quotes for houses, apartments and units across Brisbane and Moreton Bay. Fully insured, police-checked cleaners and a 7-day free re-clean.