Marks on walls are among the most common items on a property manager’s exit report. The good news is that most scuffs, fingerprints and grime wipe off. The risk is damaging the paint by scrubbing too hard or using the wrong product.
Quick answer
Dust the wall first, then spot-clean marks with warm water and a little dishwashing liquid on a soft cloth. Test any stronger cleaner or melamine sponge on a hidden spot first, work gently, and dry the area. Flat or matte paint marks easily, so be careful with it.
Start with the right method
- Dust first. Run a dry microfibre mop or cloth over the wall to remove dust and cobwebs.
- Test a hidden spot. Try your cleaner behind a door or inside a wardrobe and check it does not leave a shiny or pale patch.
- Use mild soapy water. Warm water with a few drops of dishwashing liquid removes most fingerprints and scuffs.
- Work gently from the bottom up to avoid streaks running down over dirty areas.
- Dry with a clean cloth.
Common marks and what to try
| Mark | Try |
|---|---|
| Fingerprints around switches | Mild soapy water, then dry |
| Furniture scuffs | A lightly dampened melamine sponge, with very little pressure |
| Kitchen grease on walls | Diluted degreaser, rinse with clean water |
| Blu-tack residue | Roll a fresh piece of blu-tack over it to lift residue |
| Crayon or pen | Test carefully; some marks need touch-up paint, which is a repair |
What not to do
- Do not scrub matte or flat paint hard; it polishes or lifts
- Avoid abrasive powders and scourers
- Do not soak plasterboard with water
- Do not repaint patches yourself unless your agent approves; mismatched paint can look worse than the mark
Spot cleaning vs wall washing
A standard bond clean includes spot-cleaning marks on walls and wiping light switches and power points. Full wall washing, where whole walls are washed top to bottom, is an add-on from $50 per wall. It is worth considering for kitchens, hallways and children’s rooms. See our checklist for what is included.
Frequently asked questions
Will a melamine sponge damage paint?
It can. Melamine sponges are mildly abrasive. Use very light pressure and test a hidden spot first.
Can every mark be removed?
No. Some marks are in the paint itself, and some paint finishes do not tolerate cleaning. These may need repainting, which is a repair.
Are walls included in a bond clean?
Spot cleaning is included. Full wall washing is an optional extra.
Need a bond clean in Brisbane?
Free, no-obligation quotes for houses, apartments and units across Brisbane and Moreton Bay. Fully insured, police-checked cleaners and a 7-day free re-clean.
